Tips for solving the sticking of transparent epoxy resin
Source:
|
Author:SENLEEMOLD
|
Published time: 2020-11-17
|
489 Views
|
Share:
When we use liquid mold silicone to remould transparent epoxy resin crafts, we will encounter the problem of sticking and difficult to open the mold. If we use a mold release agent, the epoxy crafts will be blurred and opaque. Senli silicone mold products manufacturers After exploring and summarizing the following solutions. If you are using condensed liquid mold silicone, you can put the silicone mold in an oven (80°C-90°C) for two hours, depending on the size of the silicone mold, and then wait for the silicone mold to cool down before adding epoxy resin. The problem of sticking.
我们使用液体模具硅胶翻模透明环氧树脂工艺品时会遇到粘模导致开模难的问题,如果使用脱模剂就会造成做出来的环氧树脂工艺品模糊不透明,森力硅胶模具制品厂家经过摸索了总结出了如下的解决技巧。
如果使用的是缩合型液体模具硅胶,可以将硅胶模具放入烘箱中(80℃-90℃)烤模两小时,具体视硅胶模具大小,然后待硅胶模冷却后再复环氧树脂就可以解决粘模的问题。
如果使用的是加成型液体模具硅胶出现粘模的问题不是硅胶模具或者母模原型不够清洁,就是硅胶或树脂质量有问题。
如果对于要求不是很高的也可以选择有挥发性的专用脱模剂也是可以解决粘模难的问题。